CD6004 General CMOS quad rail to rail amplifier-承芯微-承芯微电子(北京)有限公司

General Purpose OpAmps

CD6004

General CMOS quad rail to rail amplifier

Active | Production cycle：

Datasheet CAD Model Bulk inquiry

Products Selection

CD6004AS14
Price：$0.38

Package：SOP-14

Stock：11950

Package Qty：Tape and Reel, 2500

Price：
10+   $0.38
100+   $0.32
1000+   $0.27
2500+   $0.23
CD6004ATS14
Price：$0.39

Package：TSSOP-14

Stock：0

Package Qty：Tape and Reel, 2500

Price：
10+   $0.39
100+   $0.35
1000+   $0.30
3000+   $0.25

Price：

Quantity：

Total：$0.00

Add to Cart

Channel: 4
Offset Voltage(Max@25℃)(mV) :3
Quiescent Current/Amplifier(Typ)(μA):80
Supply(Min)(V):2.1
Supply(Max)(V):6
Gain-Bandwidth Product(Typ)(MHz):1
Slew Rate(V/ms):700
Input/Output:rail to rail
Input Offset Voltage Average Drift(μV/℃):2
Input Voltage Noise Density(@1kHz)(nV/√Hz):27
Input Bias Current(pA):1
Open-Loop Voltage Gain(Typ)(dB):110
Common-Mode Rejection Ratio(Typ)(dB):100
Special performance:EMI Hardened

Low Quiescent Current: 80 µA/amp
Supply Voltage: 2.1V to 6.0V
Input Voltage Noise Density: 27nV/√Hz at 1 kHz
Rail-to-Rail Input and Output
Gain Bandwidth: 1 MHz
Slew Rate: 0.7V/μs
Low Offset Voltage: ±3mV Maximum
Offset Voltage Temperature Drift: 2μV/°C
Extended Temperature Range: –40°C to +125°C

Sensor Interface
Smoke/Gas/Environment Sensors
Portable Instruments and Mobile Device
Active Filters, ASIC Input or Output Amplifier

Description

The CD600X series are CMOS dual, and quad RRIO op-amps with low offset, low power and stable high frequency response. These devices own very good AC performance with 1MHz bandwidth, 0.6V/μs slew rate and low distortion while drawing only 80μA of quiescent current per amplifier. The input commonmode voltage range extends 300mV beyond V– and V+, and the outputs swing rail-to-rail.
The CD600X family can be used as plug-in replacements for many commercially available op-amps to reduce power and improve input/output range and performance. The combination of features makes the CD600X ideal choices for motor control and portableaudio amplification, sound ports, and other consumer Audio. The CD600X Op-amp is very stable, and it is capable of driving heavy capacitive loads such as those found in LCDs. The ability to swing rail-to-rail at the inputs and outputs enables designers to buffer CMOS DACs, ASICs, or other wide output swing devices in single-supply systems.

CD6004 | CAD Model

Bulk inquiry